AirWolf 2
The AirWolf 2 is a high power outdoor 250mW wireless Client Bridge / Router system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 15 Mb/sec.
It complies with the 802.11b and g standards to insure interoperability.
The AirWolf 2 is housed in a UV resistant and UL rated weatherproof enclosure with a nice aesthetic appearance and clean lines. It includes an integrated 14dBi high efficiency antenna for extended range.
With its advanced software, the AirWolf 2 supports multiple operating modes, including; Client Bridge, Client Router, Access Point Router, Access Point + WDS and Point to Point.
The AirWolf 2 comes complete with Cat5e rated POE (Power Over Ethernet) power inserter and 18VDC auto-ranging power supply.
The corrosion resistant bracket system accommodates pole or wall mounting.
The unit supports an optional external antenna connector.
Key Features :
| IEEE 802.11b/g | Operational Modes |
|
| 802.11b/g 54Mbps Device | Bridge | |
| 64/128 bit WEP | Router | |
| Disable SSID broadcasts | Functionality Modes | |
| MAC based access control | Access Point | |
| IEEE 802.1x | Access Point Client | |
| EAP, PEAP, WPA, WPA2 | Wireless Distribution System | |
| WDS (up to 6 bridges) | WDS + Access Point | |
| Antenna Alignment Utility | Universal Repeater | |
| Transmit power control | DHCP Server | |
| Wireless client isolation | Static DHCP mappings | |
| Wireless client status | DHCP mappings Listing | |
| Management | Firmware Upgrade | |
| Web Interface | Web Interface | |
| Discovery Tool | Discovery Tool | |
| SNMP | Power Over Ethernet | |
| SSH | Power Supply up to 18v | |
| Telnet | Passive PoE |
|
| Configuration | Watchdog timer | |
| Backup / Restore | Hardware | |
| Configuration reset | Software |
